Fused silica dome spec

Fused silica dome

 

Fused silica is the amorphous (glassy) state of silicon oxide (quartz, silica). It is a typical glass with a long-range disordered atomic structure. It provides its high service temperature and low coefficient of thermal expansion by cross-linking its three-dimensional structure.UV silica has a good transmittance from 180nm to 2650 nm, then it is a good choice for protected UV Radiometers.And Fused Silica mechanical properties it better than N-BK7, Borosilicate. Some high-quality deep-sea housings are made of fused silica domes, which have wide-angle and can be protective the deep-sea camera

 

Our Company can provide provide fused silica silica dome with diameters from 5-300mm (accuracy up to 40-20, 1/4L@633nm),coating AR, BBAR, AF or upon request.

 

Technical parameters of Sapphire dome

Material

Sapphire

Diameter range

5mm-300mm

Diameter tolerance

+/-0.03mm 

Surface   accuracy

1/4-1   lambda

Surface quality

40/20,   60/40, 80/50

Clear   Aperature

90%

Coating

Uncoated   or customized

 

Material properties of fused silica

Optical Properties


Transmission   Range

0.18-2.1μm

Refractive   index@0.5876μm

1.4585

Physical Properties


Density[g/cm3]

2.21

Melting   Point[deg C]

1900

ThermalConductivity[W/(m×deg C)]

1.35

Thermal   Expansion [deg C-1 ]

4.0*10-6

Specific Heat   Capacity[J/(Kg*deg C ]

0.728*10-3

Young's   Modulus[GPa]

7.36

Shear   Modulus[GPa]

3.14

Poisson   Coefficient

0.17

Chemical Properties


Solubility

Insoluble

 

Transmission curve

Fused silica is commonly used in applications ranging from ultraviolet (UV) to near-infrared (NIR), and its high transmittance, good heat resistance, and excellent environmental durability make it suitable for use in laser equipment, emission and detection protection equipment, and imaging systems in the ultraviolet spectrum.


 

image.png